How can we help?
Having trouble? Click here to access our troubleshooting guide.
Your Question:
Ecotec F28
BOILER: Ecotec F28
Information:
Meaning:
Failure during start-up: Ignition unsuccessful
Cause:
Gas meter defective or gas pressure monitor has triggered, air in gas, gas flow pressure too low, thermal isolator device (TAE) has triggered, condensate duct blocked, incorrect gas restrictor, incorrect spare part gas valve, fault on the gas valve, multiple plug on PCB incorrectly plugged in, break in cable harness, ignition system (ignition transformer, ignition cable, ignition plug, ignition electrode) defective, ionisation current interrupted (cable, electrode), incorrect earthing of product, electronics defective
Disclaimer: Whilst every attempt is made to ensure the accuracy of information contained on this help centre, errors can occasionally occur. The Vaillant Group cannot accept any responsibility for any reliance upon such information, any omissions or any subsequent loss or damage.Vaillant Group recommends that only qualified, gas safe registered engineers carry out repairs, installation or servicing.Vaillant Group reserves the right to amend , update, or withdraw any information within the help centre without prior notice.
All Images and content in this help centre is a copyright of Vaillant and must not be reproduced without the express permission of Vaillant Group. Such permission may be obtained by emailing servicevisit@vaillant.com with details of proposed usage.
Gas safe register is a registered trademark of the HSE and is used under license.